Wellhead Flange Wireline Pressure Control Equipment Alloy Steel
Wireline Wellhead Flange Wireline Pressure Control Equipment
I. Overview
The wellhead flange is used to connect the tubing pin with the wellhead, with the upper part connected to the tubing pin and the lower part
connected to the wellhead. The wellhead flange is connected by bolts and nuts. When in use, the gasket is placed between the sealing surfaces.
After the nut is tightened, the specific pressure on the gasket surface reaches a certain value, and then the gasket is deformed, and the uneven
part on the sealing surface is filled, so that the connection is tight without leakage.
II the pressure test:
The wellhead flange shall be periodically tested for compressive strength, and the test pressure shall be 1.5 times of the working pressure.
1. Install the pressure test joint and connect the pressure test pipeline;
2. Start the pressure test pump for pressure test: press it to the test pressure, hold it for 15 minutes without leakage, and fill in the test record card.
III. Routine maintenance:
1. The pressure test shall be conducted regularly;
2. When temporarily not in use, it should be stored with silk protector.
Welcome to contact us at any time.
Baoji Ruixin Energy Equipment Co.,Ltd has only focused on the research and development and manufacturing of slickline equipment and tools, built a high-tech enterprise with excellence and pursued the professionalism and accuracy of products. Always follow the site, serve the site, and solve the site problems with rich experience and technology; Ensure the practicability of the product. To provide excellent equipment and sincere service for slickline service companies in China and other countries around the world.
Product Tags:
|
|
10k Wireline Pressure Control Equipment Alloy Steel Wellhead Flange 2.5 Inch Images
|
